RealDash2.7.2 - App Store
You'll be able to see results in few seconds.
Publisher Description
The perfect vehicle companion app for road trips, street and race track. Or just having fun with your favorite racing simulator.
RealDash is free to try. Consider subscribing to My RealDash service if you find this app useful.
* Pixel Perfect(TM) customization of dashboards. Limited only by imagination.
* Super high quality visuals and animated gauges.
* Gallery with downloadable free and premium Dashboards and Gizmos.
* Read and clear vehicle error codes.
* Map and Speed limit display.
* Voice commands allow hands free operation.
* Instant and average fuel consumption.
* Performance meter 0-60, 0-100, 0-200, 60 feet, 1/8 mile, 1/4 mile, and mile.
* Measure horsepower and torque.
* A powerful Trigger-> Action system.
* Create alarms and visual effects based on configurable triggers.
* A lap timer with dozens of automatically detected race tracks.
Supported ECUs:
* Autronic SM4,SM2, and SMC
* DTAFast S-Series
* EasyEcu 3+
* Ecumaster EMU
* Hybrid EMS
* KMS MP25 and MD35
* Megasquirt 1,2,3 / Microsquirt
* Motorsport-Electronics ME221
* Nissan Consult
* OBD2 via ELM327 adapter
* Spitronics ECU & TCU
* Tatech 32 & 38
* UltraSky EMS
* VEMS v3
+ Custom hardware and DIY solutions via our open protocol.
RealDash can connect to your vehicle with a WiFi, or Bluetooth BLE (OBD2 only) adapter. We recommend serial to WiFi adapters from perfecttuning.net.
Supported Racing games:
- Assetto Corsa
- BeamNG Drive
- Codemasters F1 2015-2020
- Dirt Rally
- Euro Truck Simulator 2
- Forza Horizon 4
- Forza Motorsport 7
- Gran Turismo Sport
- Gran Turismo 7
- Grid 2
- Live for Speed
- Project Cars
- Test Drive Unlimited: Solar Crown
- Wreckfest 2
RealDash can be used without connection to ECU. Then a GPS and device internal sensors are available for:
* Vehicle speed.
* Your current location on map.
* Current speed limit.
* Lap timer.
* Acceleration info.
* Performance measurements (with limited accuracy).
RealDash offers an optional annual My RealDash subscription. My RealDash allows you to stream your live engine data to a web page.
The My RealDash subscription is available on an annual tier, which auto-renews. The subscription is priced at 24€ / year.
Your subscription automatically renews unless auto-renew is turned off in at least 24-hours before the end of the current payment period. Your account will be charged 24€ for renewal within 24-hours prior to the end of the current period.
Subscriptions may be managed by the user and auto-renewal may be turned off by going to the user's My RealDash Account Settings after purchase. No cancellation of the current subscription is allowed during active subscription period. Any unused portion of a free trial will be forfeited if you purchase a subscription.
Privacy policy: http://www.realdash.net/privacy.html
Terms of Service: http://www.realdash.net/terms_of_use.html
We hope you enjoy using RealDash. Have Fun!
Version History - 2.7.2 released 5.10.2026
New:
* Added support for animated PNG files (apng)
Fixes:
* External GPS devices have been moved under 'External GPS' category when creating a new connection.
* Fixed issues in networking error handling. 2.7.2 Oct 6 New:
* Race track: Calder Park Raceway, Australia.
* Race track: OuluZone, Finland.
* Text formatting option: Hex.
* writeRepeatCount attribute in CAN XML.
* New Action: Reset Lap Timer.
* Support for SatellCom K2S external GPS module.
Fixes:
* Seeedstudio CAN adapter V8.00 configuration message.
* Send CAN frame action does not automatically fill the frame to 8 bytes.
* Removed automatic 'multisend' from CAN frames.
* Fixed a potential crash in street info handling. 2.7.1 Sep 23 New:
* Race track: Kaanaa, Finland.
Fixes:
* Fixed keyboard control issues on global popups.
* Fixed a crash on non-animated GIF loading.
* Fixed crash on networking. 2.7.0 Sep 8 New:
* Animated images can now get a frame from attached input.
Fixes:
* Simulation mode does not change custom/Ecu Specific values.
* Location updates are now discarded if app is in demo mode. 2.6.9 Sep 1 Fixes:
* Fixed multiline text issue.
* Fixed coolant temperature issue on BeamNG Drive.
* Fixed CAN speed selection not working.
* Fixed crash on 'Load Recent' actions. 2.6.8 Aug 14 - 2.6.7 released 17.6.2026
New:
* Option to delete local files when logging out from MRD.
* Dash Data values increased to 40.
Fixes:
* Fixed Values per second calculated input.
* Fixed over aggressive service notification.
* Same camera stream can be used with multiple Video Gauges.
* Fixed issue that may cause button with Hold Value action to stick. 2.6.7 Jun 18 Fixes:
* Gauges reset when data source is changed.
* Fixed Street info and speed limits not updating. 2.6.6 May 6 New:
* Added calculated input for Density Altitude.
* Rotate value up/down action now has optional comma separated value set.
* Multiple new detected racetracks.
Fixes:
* CAN XML initialValue attribute.
* SLCAN silent mode now works.
* Input select popup not accepting 'GPIO' or 'Other' categories.
* Non-zero value can now be set to 'value change into' type of trigger.
* Startup crash when input value name was used in global action.
* Datalog playback demo mode option moved to 'Data Source'.
* Added 'Transmission' category into Debug Data View.
* Improved multithreading support for performance and reliability. 2.6.5 Apr 22 Fixes:
* Mask image preventing line rendering on autoscaling.
* New dashboard template having 0 autoscaling sweep angle.
* Autoscrolling text respects its container clipping area. 2.6.4 Mar 11 New:
* Support for Test Drive Unlimited: Solar Crown
* CAN support for Toyota GT86 (untested)
* CAN support for Nissan Frontier D40 (untested)
Fixes:
* Fixed an occasional crash/hang
* Fixed CAN composite frame 'readTimeout' property not working correctly.
* Link ECU: Fixed CAN descriptions. 2.6.3 Feb 3 Fixes:
* Fixed odometer value not setting correctly from Garage.
* Fixed CAN XML startbit-bitcount when offset and length was not specified.
* Fixed re-connect on some connection types.
* OBD2: Fixed parsing of ATRV response. 2.6.2 12/18/2025 New:
* Gauge Fade can now be controlled from Look'n Feel
Fixes:
* tinyxml2 updated to latest version.
* Crash on serial handling when invalid data was received. 2.6.1 11/25/2025 Fixes:
* Crash on street info parsing. 2.6.0 11/09/2025 New:
* Option to set vehicle specific warning and critical levels.
* CAN composite ID has optional bitmask.
* CAN description for Open Vectra C.
Fixes:
* Fixed occasional crash on HTTP handling. 2.5.9 10/31/2025 New:
* Support for SVG image files.
* Custom inputs can now be edited from 'Settings-> Units & Values-> Imported Values' 2.5.8 09/28/2025 Fixed issue with dashboard file backwards compatibility. 2.5.7-2 09/10/2025 New:
* CAN description for 2020 Ford Mustang GT.
* Wreckfest 2 is now supported.
* Video and Gif animation playback speed can be controlled with Math.
* Trigger compare operator 'value changed to'.
* Simulation mode produces some text data for common inputs.
* New Action: Load Recent Dash.
Fixes:
* Hold value action not resetting value if button press was canceled.
* Invalid checksum on configuration for Waveshare and 'Type 1' CAN adapters.
* Each gauge in container now has independent fade animation value.
* Graph gauge mask image.
* Global action target gauge name is not set to NONE if gauge is not found on current dash. 2.5.7 09/08/2025 New:
* Haltech CAN V3 support.
Fixes:
* Lap Timer values are now updated correctly.
* Gauge color slider setting transfers in copy-paste.
* 'Bring to Front' and 'Send Back' now works with gauges in container.
* Improved reliability of music info from external music players.
* Fixed crash when changing font on autoscaling gauges.
* Autoscale segment images now respect the mask.
* OBDLink CAN Adapter 29bit ID:s now work. 2.5.6 08/12/2025 New:
* Gauge.S is now supported.
Fixes:
* Crash when container was moved in z-order.
* Battery level input. 2.5.5 06/27/2025 New:
* Triggers have a delay option.
* Vibrate action has adjustable duration.
* Added support for Holley Sniper 1.
* Input: Average Fuel Consumption for last 20 km.
Fixes:
* Improved gauge select list.
* Holley CAN serial number masking.
* Range is calculated from last 20 kilometers of driving.
* Profile specific values are now properly loaded when switching to another vehicle profile.
* Disabling scrolling on container gauge. 2.5.4 06/18/2025 New:
* CAN XML: timeout attribute for frames.
* ISR V3 connection type, untested.
Fixes:
* Gauges in container can be selected for show/hide action.
* Distance to closest speed camera now excludes cameras that are moving away.
* Container gauge preview on popups.
* Fixed occasional hang on app reboot after changing settings that require restart.
* Fixed color slider gauges not updating if color value was set from different source. 2.5.3 05/25/2025 New:
* Racetracks: US, Hallett Motor Raceway and MSR Houston.
* New input: Body Electronics-> Sunlight Sensor.
Fixes:
* Minor flicker of map tiles.
* Arc Gauge respects container clipping area.
* Copy-paste of container copies the contained gauges.
* Container area is shown when gauge inside is selected.
* Buttons can now be placed under the container.
* Add/Remove with Container now has Undo.
* Gauge delete/cut now has Undo.
* Fuel level is not smoothed on simulation mode.
* OBD2: Fixed issue of data loss with some type of custom header usage. 2.5.0 05/16/2025 Fixes:
* Button Press action now works correctly.
* Gauges in container now retains aspect.
* Optimized CPU usage on map gauge.
* OBD2: Fixed issue on values with custom headers. 2.4.9 03/13/2025 New:
* New inputs: Body-> Rear Defrost Active, Windshield Defrost Active & Instrument Light Dimmer.
* Custom Intro images have an option to adjust display time.
* XML enum attribute value '_' (underscore) can be used to discard the value completely.
* Flagtronics V0.4 CAN Support (untested)
Fixes:
* Simulation mode has been restored to simulate input values.
* Intro now plays mp4 video correctly when an image was on shown previously.
* XML enum no longer overrides the Gear input text formatting.
* Fixed Animate Value action crash.
* Robotell CAN adapter: RealDash no longer attempts to change the configuration of the adapter. 2.4.8 02/20/2025 New:
* New Gauge animation types; value-morph and value-fade.
* BMW R1200GS CAN support.
* Racetrack: Spain, Kotarr.
Fixes:
* units attribute in XML files is case insensitive.
* CAN XML Composite ID parsing when value had signed,float or double values.
* Fuel level input mapping is simplified.
* Custom inputs are created with mapping when settings are imported.
* Some duplicate OBD2 specific inputs replaced with common ones.
* Automatic units conversion is now applied to gauges inside the container. 2.4.7 02/06/2025
About RealDash
The company that develops RealDash is Napko Oy. The latest version released by its developer is 2.7.2.
To install RealDash on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-13 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the RealDash as malware if the download link is broken.
How to install RealDash on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the RealDash is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After RealDash is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 2.7.2
posted on 2026-10-13
Version History - 2.7.2 released 5.10.2026
New:
* Added support for animated PNG files (apng)
Fixes:
* External GPS devices have been moved under 'External GPS' category when creating a new connection.
* Fixed issues in networking error handling. 2.7.2 Oct 6 New:
* Race track: Calder Park Raceway, Australia.
* Race track: OuluZone, Finland.
* Text formatting option: Hex.
* writeRepeatCount attribute in CAN XML.
* New Action: Reset Lap Timer.
* Support for SatellCom K2S external GPS module.
Fixes:
* Seeedstudio CAN adapter V8.00 configuration message.
* Send CAN frame action does not automatically fill the frame to 8 bytes.
* Removed automatic 'multisend' from CAN frames.
* Fixed a potential crash in street info handling. 2.7.1 Sep 23 New:
* Race track: Kaanaa, Finland.
Fixes:
* Fixed keyboard control issues on global popups.
* Fixed a crash on non-animated GIF loading.
* Fixed crash on networking. 2.7.0 Sep 8 New:
* Animated images can now get a frame from attached input.
Fixes:
* Simulation mode does not change custom/Ecu Specific values.
* Location updates are now discarded if app is in demo mode. 2.6.9 Sep 1 Fixes:
* Fixed multiline text issue.
* Fixed coolant temperature issue on BeamNG Drive.
* Fixed CAN speed selection not working.
* Fixed crash on 'Load Recent' actions. 2.6.8 Aug 14 - 2.6.7 released 17.6.2026
New:
* Option to delete local files when logging out from MRD.
* Dash Data values increased to 40.
Fixes:
* Fixed Values per second calculated input.
* Fixed over aggressive service notification.
* Same camera stream can be used with multiple Video Gauges.
* Fixed issue that may cause button with Hold Value action to stick. 2.6.7 Jun 18 Fixes:
* Gauges reset when data source is changed.
* Fixed Street info and speed limits not updating. 2.6.6 May 6 New:
* Added calculated input for Density Altitude.
* Rotate value up/down action now has optional comma separated value set.
* Multiple new detected racetracks.
Fixes:
* CAN XML initialValue attribute.
* SLCAN silent mode now works.
* Input select popup not accepting 'GPIO' or 'Other' categories.
* Non-zero value can now be set to 'value change into' type of trigger.
* Startup crash when input value name was used in global action.
* Datalog playback demo mode option moved to 'Data Source'.
* Added 'Transmission' category into Debug Data View.
* Improved multithreading support for performance and reliability. 2.6.5 Apr 22 Fixes:
* Mask image preventing line rendering on autoscaling.
* New dashboard template having 0 autoscaling sweep angle.
* Autoscrolling text respects its container clipping area. 2.6.4 Mar 11 New:
* Support for Test Drive Unlimited: Solar Crown
* CAN support for Toyota GT86 (untested)
* CAN support for Nissan Frontier D40 (untested)
Fixes:
* Fixed an occasional crash/hang
* Fixed CAN composite frame 'readTimeout' property not working correctly.
* Link ECU: Fixed CAN descriptions. 2.6.3 Feb 3 Fixes:
* Fixed odometer value not setting correctly from Garage.
* Fixed CAN XML startbit-bitcount when offset and length was not specified.
* Fixed re-connect on some connection types.
* OBD2: Fixed parsing of ATRV response. 2.6.2 12/18/2025 New:
* Gauge Fade can now be controlled from Look'n Feel
Fixes:
* tinyxml2 updated to latest version.
* Crash on serial handling when invalid data was received. 2.6.1 11/25/2025 Fixes:
* Crash on street info parsing. 2.6.0 11/09/2025 New:
* Option to set vehicle specific warning and critical levels.
* CAN composite ID has optional bitmask.
* CAN description for Open Vectra C.
Fixes:
* Fixed occasional crash on HTTP handling. 2.5.9 10/31/2025 New:
* Support for SVG image files.
* Custom inputs can now be edited from 'Settings-> Units & Values-> Imported Values' 2.5.8 09/28/2025 Fixed issue with dashboard file backwards compatibility. 2.5.7-2 09/10/2025 New:
* CAN description for 2020 Ford Mustang GT.
* Wreckfest 2 is now supported.
* Video and Gif animation playback speed can be controlled with Math.
* Trigger compare operator 'value changed to'.
* Simulation mode produces some text data for common inputs.
* New Action: Load Recent Dash.
Fixes:
* Hold value action not resetting value if button press was canceled.
* Invalid checksum on configuration for Waveshare and 'Type 1' CAN adapters.
* Each gauge in container now has independent fade animation value.
* Graph gauge mask image.
* Global action target gauge name is not set to NONE if gauge is not found on current dash. 2.5.7 09/08/2025 New:
* Haltech CAN V3 support.
Fixes:
* Lap Timer values are now updated correctly.
* Gauge color slider setting transfers in copy-paste.
* 'Bring to Front' and 'Send Back' now works with gauges in container.
* Improved reliability of music info from external music players.
* Fixed crash when changing font on autoscaling gauges.
* Autoscale segment images now respect the mask.
* OBDLink CAN Adapter 29bit ID:s now work. 2.5.6 08/12/2025 New:
* Gauge.S is now supported.
Fixes:
* Crash when container was moved in z-order.
* Battery level input. 2.5.5 06/27/2025 New:
* Triggers have a delay option.
* Vibrate action has adjustable duration.
* Added support for Holley Sniper 1.
* Input: Average Fuel Consumption for last 20 km.
Fixes:
* Improved gauge select list.
* Holley CAN serial number masking.
* Range is calculated from last 20 kilometers of driving.
* Profile specific values are now properly loaded when switching to another vehicle profile.
* Disabling scrolling on container gauge. 2.5.4 06/18/2025 New:
* CAN XML: timeout attribute for frames.
* ISR V3 connection type, untested.
Fixes:
* Gauges in container can be selected for show/hide action.
* Distance to closest speed camera now excludes cameras that are moving away.
* Container gauge preview on popups.
* Fixed occasional hang on app reboot after changing settings that require restart.
* Fixed color slider gauges not updating if color value was set from different source. 2.5.3 05/25/2025 New:
* Racetracks: US, Hallett Motor Raceway and MSR Houston.
* New input: Body Electronics-> Sunlight Sensor.
Fixes:
* Minor flicker of map tiles.
* Arc Gauge respects container clipping area.
* Copy-paste of container copies the contained gauges.
* Container area is shown when gauge inside is selected.
* Buttons can now be placed under the container.
* Add/Remove with Container now has Undo.
* Gauge delete/cut now has Undo.
* Fuel level is not smoothed on simulation mode.
* OBD2: Fixed issue of data loss with some type of custom header usage. 2.5.0 05/16/2025 Fixes:
* Button Press action now works correctly.
* Gauges in container now retains aspect.
* Optimized CPU usage on map gauge.
* OBD2: Fixed issue on values with custom headers. 2.4.9 03/13/2025 New:
* New inputs: Body-> Rear Defrost Active, Windshield Defrost Active & Instrument Light Dimmer.
* Custom Intro images have an option to adjust display time.
* XML enum attribute value '_' (underscore) can be used to discard the value completely.
* Flagtronics V0.4 CAN Support (untested)
Fixes:
* Simulation mode has been restored to simulate input values.
* Intro now plays mp4 video correctly when an image was on shown previously.
* XML enum no longer overrides the Gear input text formatting.
* Fixed Animate Value action crash.
* Robotell CAN adapter: RealDash no longer attempts to change the configuration of the adapter. 2.4.8 02/20/2025 New:
* New Gauge animation types; value-morph and value-fade.
* BMW R1200GS CAN support.
* Racetrack: Spain, Kotarr.
Fixes:
* units attribute in XML files is case insensitive.
* CAN XML Composite ID parsing when value had signed,float or double values.
* Fuel level input mapping is simplified.
* Custom inputs are created with mapping when settings are imported.
* Some duplicate OBD2 specific inputs replaced with common ones.
* Automatic units conversion is now applied to gauges inside the container. 2.4.7 02/06/2025
Disclaimer
Official App Store Link
We do not host RealDash on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for RealDash is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.